Agicb industrial parts LLP
Self Aligning Ball Bearings
Self-aligning ball bearings. Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed.
In a self-aligning bearing, the inner ring has two raceways and the outer ring has a single spherical raceway with its center of curvature coincident with the bearing axis. This allows the axis of the inner ring, balls and cage to deflect around the bearing center to automatically correct misalignment caused by housing and shaft machining or installation error.
A self-aligning bearing is recommended when the alignment of the shaft and housing is difficult or when the shaft may bend during operation. Brda notes that similar to deep groove ball bearings, most self-aligning ball are for general use.
- Self Aligning Ball Bearings RL-5
- CONSOLIDATED BEARING
- RL-5
- Self Aligning Ball Bearings RL-22
- CONSOLIDATED BEARING
- RL-22
- Self Aligning Ball Bearings RL-9
- CONSOLIDATED BEARING
- RL-9
- Self Aligning Ball Bearings RL-8
- CONSOLIDATED BEARING
- RL-8
- Self Aligning Ball Bearings RL-7
- CONSOLIDATED BEARING
- RL-7
- Self Aligning Ball Bearings RL-32
- CONSOLIDATED BEARING
- RL-32
- Self Aligning Ball Bearings RL-9 C/3
- CONSOLIDATED BEARING
- RL-9 C/3
- Self Aligning Ball Bearings 2302E-2RS
- CONSOLIDATED BEARING
- 2302E-2RS
- Self Aligning Ball Bearings 2307 M C/2
- CONSOLIDATED BEARING
- 2307 M C/2
- Self Aligning Ball Bearings 2306E-K 2RS C/3
- CONSOLIDATED BEARING
- 2306E-K 2RS C/3
- Self Aligning Ball Bearings 2307 M
- CONSOLIDATED BEARING
- 2307 M
- Self Aligning Ball Bearings 2305-K 2RS
- CONSOLIDATED BEARING
- 2305-K 2RS